
01
Car Parking System Manufacturers
This is two level car parking system, which provides parking space for two cars one the other. The car on the ground level will need to be moved out before parking/removing the car on the raised platform.


02
THREE LEVEL CAR PARKING SYSTEM (OE3SS/SM/SB)
This is three level car parking system, which provides parking space for three cars one above the other. The car on the ground level will need to be moved out car parked on level 2 & simply to remove level 3 cars , cars from ground level and level 2 need to be remove before parking/removing the car on the raised platform

03
CANTILEVER CAR PARKING SYSTEM (OEC2S)
This is single post car parking system which provides parking space for two cars one above the other. Aesthetic design makes it look posh, it is based on hydraulic system.
The unique feature of this system is it’s based on single pole which saves more space and installed in the driveways, touching the compound wall or any other corner.


04
FOUR LEVEL PIT PARKING SYSTEM (OE4PSS/SM/SB)
This is four level pit car parking system, which provides parking space for four cars one above the other. To take out upper level or lower level car, entry-level car (ground level car) has to be driven out
TECHNICAL SPECIFICATION
- System stand on four H-beam with base plates(mounted on the floor into the pit/well)
- Platform made of hot dipped galvanized corrugated floor plates to reduce dead weight & increase durability
- Colour scheme for the system will be provided as per client requirement
System is lifted & lowered on bases of three hydraulic cylinder - PLC control panel key/push button for easy operation.
- Limit switch for each slot to prevent damages to the car on the upper pallet.
- PLC control panel key/push button for easy operation.
- Electromechanical lock for unwanted lowering of platforms.
TO BE PERFORMED BY CUSTOMER
- Customer should provide a proper parking space allotted as per plan without any obstruction.
- Civil work will be in client scope for the foundation of the two-level parking system at the allotted space for system.
- Lockable storage room should be provided at the site for storing tools, equipment’s
and other valuable needed during erection. - MCB and Main Electrical Connection (or 4 pole RCBO) along with electrical cable fitting must be provided by Main Power supply to the parking system. With 3PH, 415VAC,50Hz with Neutral land Earth (3PH+N+E)
- Incoming cable size should be at least 5Core*2.5sq.mm. flexible Copper multi core cable (3PH+N+E) from Main switch to control panel
- Base area of the parking space allotted shall be Concrete with minimum strength of M20.